We accept all major credit cards
You are here: Home > BUY PRODUCTS > SHOP BY PROCESS > EXTERIOR DETAIL > Autoglym PowerMax-3 Multiwash TFR
Autoglym PowerMax-3 Multiwash TFR
Autoglym PowerMax-3 Multiwash TFR
NON-CAUSTIC. Multi-purpose and biodegradable. For the removal of traffic film, oil, grease and copolymer coatings.
- For cars, light commercials, trucks, engines, chassis, wheels and vehicle interiors.
- Use with hot or cold pressure washers or pre-spray systems.
- Non classified. Minimised environmental impact and user friendly.
- Pre-dilution factor 2 controls cost in use + Pre-dilution factor 7 for general interior cleaning
H3. How to use:
HAND PRE-SPRAY
Apply evenly with low pressure sprayer, starting with lower areas. Rinse systematically with pressure washer.
Dilution Rates:
- Vehicle Body: 1:32
- Engine: 1:4
- Interior: 1:7
- Wheels: 1:4
- Copoly Removal: 1:4
HOT OR COLD PRESSURE WASHER
Apply systematically, starting with lower areas, rinse clean with high pressure.
Dilution Rates:
- Vehicle Body: 2%
- Engine: 4%
- Copoly Removal: 8%
COPLOYMER REMOVAL
Apply liberally with low pressure sprayer. Allow up to 5 minutes reaction time. Sponge if necessary. DO NOT allow to dry. Rinse systematically with high pressure water, preferably hot.
INTERIORS
Apply diluted product with a hand spray. Agitate with a sponge or brush, then wipe clean with a clean cloth. DO NOT USE on sensitive leather, valour fabric or suede. PRE TEST on all fabrics before use, DO NOT allow to dry. Dilute 1:7 through a hand sprayer.
PRE DILUTION FACTOR 2
This product can be diluted 1:2 parts water to increase economy, increase detergent valve on machines if required. Dilution table below refers to neat product.