We accept all major credit cards
You are here: Home > BUY PRODUCTS > SHOP BY PROCESS > EXTERIOR DETAIL > Meguiar's Ultra Cut 105 237ml
Meguiar's Ultra Cut 105 237ml
Meguiar's Ultra Cut 105 237ml
Meguiar’s Ultra Cut Compound 105 consists of super micro abrasive technology. This results in smoother paint faster, the ultra small micro abrasives are designed to permanently remove all paint defects. Meguiar’s Ultra Cut compound 105 will reduce work time and leave a high superior gloss finish ready for final polishing.
Features:
- Super Micro Abrasive Technology
- Ultra Fast Cut
- Body Shop safe
- No Fillers
Will Remove:
- Scratches
- Paint Defects
- Acid Etching
- Swirls
- Holograms
- 1200 grit or finer sanding marks
Suitable for use:
- By Hand
- Dual Action Polisher
- Rotary Polisher
For use By Hand
For best results always Clay the surface before using Meguiar’s Ultra-cut 105. Using a damp Clb polishing sponge apply about 3 pea sized drops of polish to the surface using a circular motion. Do not be tempted to rub in the direction of a scratch. If you do have stubborn scratches or marks just keep passing over the area or use a machine polisher. For a more refined finish follow with Meguiar’s Ultra Finishing Polish 205
For use with a Dual Action Polisher:
Apply 3-4 pea sized drops directly to compounding pad . Set machine to 4-5 and working in an area of about 16” x 16”. Apply moderate pressure on initial 2-3 passes followed with light pressure for following passes. Wipe off residue immediately after each panel. For a more refined finish follow with Meguiar’s Ultra Finishing Polish 205
For use with a Rotary Polisher:
Apply 1-2 pea sized drops directly to compounding pad. Set your machine to 1500-2000 rpm normally 3-4 on most rotary polishers. Using moderate pressure and working in an area of about 16” x 16” complete 2-3 overlapping passes followed with light pressure until only a thin film remains. Then buff film using a microfibre towel. For a more refined finish follow with Meguiar’s Ultra Finishing Polish 205.