We accept all major credit cards
You are here: Home > BUY PRODUCTS > SHOP BY BRAND > AUTOGLYM > Autoglym Radiant Wax 5L
Autoglym Radiant Wax 5L
DUE IN 16/12/11 ORDER NOW
Autoglym Radiant Wax 5L
Long term resin polish for all paint types. Periodic polishing gently removes harmful surface marks and gives a tough, glossy, protective barrier to preserve expensive paintwork from the harsh environment.
Internationally acclaimed Autoglym Super Resin Polish is the ultimate easy to use combination cleaner, polish and sealant….. Ideal for all types and colours of new or moderately deteriorated vehicle paintwork, including metallic, clearcoat and waterbased paint finishes. Autoglym Super Resin Polish contains special resins which provide exceptional shine and protection from most environmental hazards.
Main Features
- Hand or Machine use
- Use on weathered, Oxidised and scratched paintwork.
- Restores al Paintwork
- Forecourt Valeters and Body Shop favourite
- Professional Trade Product
How to use:
By Hand
Apply polish with a damp Clb Polish Applicator. It is important that you dampen the sponge before applying the polish. The water will act as a barrier between the applicator and the polish. This allows all the oils and carrying agents in the polish to stay in the polish.
For best results using a Rotary Machine Polisher
Autoglym Radiant Wax can be applied using a foam or wool pad. Apply 3-4 small drops of the product directly onto the pad and work into a small section of the panel. A Rotary Polisher should be set to around 1500-2000 revolutions per minute on most polishers this is setting 3-4. Work the polish in until only a thin film remains and then buff off using a Detailing Towel or soft microfiber. A Lambswool pad will increase the aggression of the cut and speed up the correction process.
For Best Results using a Dual Action Polisher
Autoglym Radiant wax can be applied using a foam or Lambswool pad. Apply 3-4 small drops of the compound directly onto the pad. Then work the polish into an area of about 12” x 12”. When using a dual action polisher you should set it to around 4000-5000 orbits per minute on most polishers this is setting 4-5. Work the polish in until only a thin film remains and then buff off using a Detailing Towel or soft microfiber. A Lambswool pad will increase the aggression of the cut and speed up the correction process.
Once the above process has been completed Protect the Paintwork with a Carnauba wax, Glaze or similar sealant.
Please remember that these products are intended for sale to Trade/Professional users only.