We accept all major credit cards
You are here: Home > BUY PRODUCTS > SHOP BY PROCESS > EXTERIOR DETAIL > Autoglym Active Insect Remover
Autoglym Active Insect Remover
OUT OF STOCK
Autoglym Active Insect Remover
The removal of unsightly dead insects is made easy when using Autoglym Active Insect remover. The concentrated foam is designed to rapidly dissolve squashed insect remains, from vehicle bodywork, windscreens and headlights.
Autoglym’s Instructions for use:
Spray onto surface to be cleaned. Allow approximately 30 seconds for insect remains to soften.
Wipe off surface with a soft cloth; Autoglym Perfect Polishing Cloth is ideal. Finally clean surface with dry paper towel or hose off if used prior to normal washing of the car. Avoid use on hot surfaces whenever possible.
Stubborn insect remains may require a second application. If the product ‘dries on’, then wipe off is improved if the cloth is dampened or sprayed with Active Insect Remover.
How Clb advise you to use Autoglym Active Insect remover:
- Pre spray the vehicle to remove any loose contamination
- Spray the contaminated area with Active Insect Remover
- Allow to dwell for at least 30 seconds
- Wipe GENTLY with your wash mitt
- Hose down
- Repeat above process if required DO NOT SCRUB the area
- Rinse and wash as normal
Ideal for use on cars, motorcycles, vans, trucks, boats and caravans.